need to replace pulleys'

[BlownGSr]

how much are the replacement pulleys?
and wich ones do I need for and 8 pound pulley I cheked jacksonracing.com for parts


and as far as I know I need to replace 2 belts? the alternator and supercharger one

then replace 2 pulleys as well one for the supercharger and one for the alternator?

[BlownGSr]

can I use 3.8 pulley?

[BlownGSr]

Im gonna go with a 6psi pulley insted of the 8
you say you have the parts in stock? I need pulley and belt replacement do you have an e-mail address I can reach you at

[JRCivic]

Well, since your name says "GSR"... I am going out on a limb here and assuming that this is your application.
If so, then the 3.8" blower pulley is in fact the 2 psi upgrade... which is more commonly referred to as the "8 psi pulley".

Call me at the shop and I can give you all of the information you need to do the swap... AND I just happened to have ALL of the parts in stock that you will need to do the upgrade !!!

heheh

[CROM]

Why do you need to replace your supercharger and alternator pulley's? Are you sure you aren't mistaken and should be talking about the IDLER PULLEYS that do wear out???

[BlownGSr]

I think these are the ones

[CROM]

Yes, those are your tensioner/idler pulleys not your Blower pulley and alternator pulley.

Those pulleys are for belt tension adjustment.

And yes, they do wear out, and you should be able to get a free set by calling up Jackson Racing.

The belts will not be free though.....